MTD

MTD Snowblower Parts and Manuals

MTD Snowblower Parts

MTD made a wide range of snowblowers, Single Stage, Two Stage and Three Stage. They range from 21 inch to 28 inch width capacity.

The majority of their snowblowers have electric start systems, and those that don’t can normally be fitted as an optional extra.

MTD snowblowers are lightweight, easy to operate, dependable and quiet. They have an ability to clear snow quickly and efficiently.

Most snowblowers will at some point need spare parts, either for routine servicing and maintenance, or if for any reason the machine needs repairing. Having a copy of the snowblower manual is really important for a number of reasons.

MTD Snowblower Manual

The manual gives important information about safe operating practices, very important to read as there is potential for real damage if the snowblower is not used correctly.

Quite often new snowblowers arrive out of the box as it were and need to be assembled. An MTD snowblower manual will give you the information and diagrams about how to assemble a snowblower.

Most manuals also include illustrated diagrams of the workings of the engine and other associated parts.

Such a diagram is really important, not only in assembling the machine, but also in being able to identify which parts need replacing, and how new ones should be installed.

The manual should also include a troubleshooting section which will give information on the most common problems people have with the snowblower.

This includes things like problems with starting it, and how best to keep the auger free of snow.

The snowblower manual also have a detailed section on servicing and maintenance.

This is essentially the manufacturers recommendations and should be closely followed.

This is important not only for the smooth running of the snowblower itself, but also to make sure it complies with the warranty.

The manual should give information about the MTD warranty itself.

There are normally some differences if the snowblower is used for commercial operations, and as such there are likely to be separate residential and commercial warranties on the machine

It is likely that the engine itself, if made by a separate manufacturer, will have a separate warranty as well. Details of all these should be included in the manual.

Finally, the manual should contain full details of customer support. This should include the headquarters of the company, phone numbers and e-mails and any other way to contact them.

MTD Snowblower Parts

Below are listed the main categories of  MTD snowblower parts, followed by a more detailed breakdown of which parts are normally available, and for which specific part of the snowblower they are needed for.

MTD Snowblower maintenance sets

MTD Snowblower belts

MTD Snowblower shave plates

MTD Snowblower shear pins

MTD Snowblower slide shoes

MTD Snowblower cables

MTD Snowblower friction wheels and discs

MTD Snowblower augers

MTD Snowblower engine parts

MTD Snowblower hardware

MTD Snowblower pulleys

MTD Snowblower tires and wheels

MTD Snowblower discharge chutes

MTD Snowblower auger gearboxes

MTD Snowblower Parts – Detailed Breakdown

Auger Parts –

  • Auger bearings
  • Auger paddle
  • Impeller
  • Impell fan
  • Hub assembly
  • Plate cowl retainer

Axles

  • Differential axle
  • Hex shaft
  • Axle shaft
  • Short axle with bushings
  • Long differential axle
  • Axle weight – lbs 10/30

Batteries and Accessories

  • Battery charger
  • Battery cover
  • Dual port charger

Bearings and Washings

  • Bearings
  • Ball bearing
  • Fang baring
  • Radial bearing
  • Struggling bearing
  • Flange
  • Polyline
  • Sealed
  • Sleeve
  • Slinger
  • Spacer
  • Spindle
  • Steeled housing
  • Height
  • ID
  • Material
  • OD
  • Size
  • Type
  • weight
  • Width

Belts –

  • Belt keeper
  • Belts by size

Brakes

  • Brake assembly
  • Brake components
  • Brake linkage
  • Brake pads and shoes
  • Auger impeller brake pad
  • Brake arm assembly
  • Brake arm with pad
  • Brake lining

Breather

Camshaft

  • Interlock camp
  • Camshaft
  • Differential can
  • Camshaft assembly

Carburettors

  • Carburettor bowls,
  • Carburettor gaskets,
  • Carburettor kits,
  • Carburettor nozzles
  • Choke lever is
  • Diaphragm kit
  • Foats, pins and kits
  • Gasket set
  • Main jet
  • Needles valves and kit
  • Climate bulbs
  • Springs

Chutes and deck size

Clamps

Clevis pins

Clips

Clutches

  • Dog sliding clutch
  • Clutch chain
  • Fork Clutch
  • Clutch paddle
  • Clutch gear
  • Clutch paddle sleeve
  • Clutch arm with brake pad
  • Jaw clutch
  • Right hand clutch lever grip

Connecting rods

Cotter pin

Couplers

Crankshaft

Cylinder head

Decals

  • Rotating danger decal
  • Differential lock decal

Dipstick

Discharge chute

  • Chute gear
  • Chute assembly
  • Outer retaining ring
  • Worm mounting bracket
  • Inner retainer ring
  • Discharge chute base
  • Chute actuation dear
  • Worm gear chute
  • Chute flange keeper
  • Quarter discharge bracket
  • Chute crank knob
  • Deflector
  • Lower chute
  • Chute retainer

Drift cutter

Drive chain

Drive components

  • Gear
  • Pinion shaft frame repair kit
  • Differential remote
  • Automatic differential
  • Pinion shaft
  • Hex shaft
  • Pin
  • Hub assembly lockout
  • Pinion sprocket
  • Ratchet dear
  • Shift carrier
  • Pinion shaft assembly
  • Disk hub
  • Slider ring assembly

Drive sprockets

Driveway marker

Just plug

Electric starter kits

Engines

  • Displacement
  • Grade
  • Power
  • Shaft size

Fan blade

Fittings

  • Dual cable fitting
  • Grease fitting
  • Zerk fitting
  • Hydraulic drive fitting
  • Straight loop fitting
  • Cable z fitting
  • Fitting

Flywheels

Frames

Cover bottom

Frame

  • Bottom frame cover
  • Frame traction
  • Tractor frame
  • Frame assembly

Friction disc

Fuel filters, lines and parts

  • Elbow fittings
  • Fuel filters
  • Fuel line
  • Fuel line fitting
  • Fuel line shut-off
  • Fuel parts
  • Hose clamp
  • In-line fuel shut-off
  • Climate bulbs
  • Shop packs

Fuel tanks

  • Fuel tank
  • Fuel tank bushing
  • Fuel tank on/off valve
  • Fuel tank strainer
  • Gas tank
  • Fuel tank nipple

Gas and oil

Gaskets

  • Air cleaner gasket
  • Base gasket
  • Carburettor gasket
  • Cylinder head gasket
  • Gasket set
  • Head gasket
  • Insulator gasket
  • Intake gasket
  • Muffler gasket

Gauges

  • Fuel gauge assembly

Gear case

  • Housing reducer assembly
  • Cast iron gear case
  • Shaft and worm gear kit
  • Impeller shaft
  • Role him
  • Gear case assembly
  • Auger Gearbox Assembly

Gloves

Governor

Handles

Headlight bulbs

Hinge pins

Hitch pins

Hose Clamps

  • Tube Clamp
  • Hose Clamp
  • Hose Wire Clamp

Hubcaps and wheel covers

Idlers

Ignition parts

  • breaker ignition
  • breaker points
  • condenser
  • flywheel keys
  • ignition coils
  • ignition kits
  • ignition set
  • modules
  • plunger breakers
  • voltage regulators

Ignition switches and keys

Light Kit

Linchpins

lubricants chemicals and oils

Lubrication systems

Maintenance kits

Mounts

  • Shaft support
  • Bracket
  • Idler arm
  • Caster Leg Weldment

Mufflers and accessories

Nuts, bolts and screws

Oil Drain

  • Petcock Assembly

Oil extractor

Oil plug

Oil seals

Pinion gear

Pistons and piston rings –

  • Piston kits
  • Piston rings
  • Pistons
  • Pivot pins
  • Ring sets

Power brushes

Power cords

Pulleys

  • Drive pulleys
  • Engine pulleys
  • Flat idler
  • Idler pulleys
  • Pulley flat idler
  • Pulley hub
  • Blower Sheave

Push rod

Retainer ring

Rings

Rivets

Rocker Arms

Role pin

Roller chain

Rubber tracks

Safety, interlock, PTO switches

  • Interlock switches
  • PTO switches
  • Toggle Switches

Scraper blades

Seals

Sheer pin

Skid shoes

Snap rings

Solenoids

Spark plugs and accessories – hex size, thread and type

Spindles

Starter parts

  • Starter brush kits
  • Starter clubbers
  • Starter dried parts
  • Starter handles
  • Starter pawls
  • Starter pulley
  • Starter recoil assemblies
  • Starter rope
  • Starter springs

Starters

Steering

  • Steering assembly
  • Steering ball joint
  • Steering gear
  • Steering rod
  • Steering spindles

Throttle and control cables

  • Auger cable
  • Brake and clutch levers
  • Chute deflector cable
  • Chute lock cable
  • Control assembly
  • Control cables
  • Controlled choke
  • Differential cable
  • Push pull controls
  • Remote wheel lock cable
  • Shift rods
  • Throttle access
  • Throttle cables
  • Throttle conduit and clips
  • Throttle controls
  • Traction cable

Tiedowns and straps

Tire chains

  • Snow Hogg two link tire chains
  • Twist link two link tire chains
  • Twist link four link tire chains

Tires

Transmission

  • Gear assembly
  • Chute rotation gearbox
  • Tooth gear,

Triggers

Valve stems

Valves

  • Exhaust valves
  • Intake valves
  • Valve caps
  • Valve guide

Weight kit

Wheel Accessories

Wheel hubs

Wheel rims

  • Compression wheel
  • Rim/hub assembly
  • Rim

Wheels

Wiring harness

Worm gears

  • Worm gear
  • Worm shaft
  • Worm and gear service assembly
  • Worm shaft assembly
  • Worm shaft

 

 

 

 

 

Share

MTD Snowblower

MTD Snowblower

MTD snowblowers come as two different types of machine,  a single stage snow thrower and a two-stage snow thrower. The terms snowblower and snow thrower used interchangeably, and it is probably worth distinguishing what they mean.

An MTD single stage snowblower is a relatively light machine, that is used to clear snow that is probably between 3 to 9 inches, and which could be considered a relatively modest snowfall. It works very simply by having a spinning auger that sucks in the snow to the machine, and then discharges it through a chute onto ground away from the snowfall.

Am MTD two-stage snowblower is a more heavyweight machine. It is intended where there is a much more intense degree of snow, and possibly ice as well. It works slightly differently to the single stage snowblower, in that it has a more intense auger, which not only sucks in the snow, but also breaks up large chunks of it, as well as chunks of ice, and then discharges it through the chute.

MTD Parts – see here

Technically, an  MTD snowblower is a single stage snowblower, whilst a snow thrower is a two-stage snowblower, although most people use the term snowblower to cover both machines.

These are some of the most common MTD snowblowers currently available.

MTD single stage snowblower

MTD 31A-2M1E706 Single-Stage Snow Thrower

MTD Pro 31AS2S1C795 Single-Stage Snow Thrower

MTD two stage SnowBlower

MTD 31A-63BD706 Two-Stage Snow Thrower

MTD Pro 31AM66FG795 Two-Stage Snow Thrower

MTD 31A-32AD706 Two-Stage Compact Snow Thrower

MTD Snowblower Parts

MTD snowblower and snow thrower parts and accessories are an important consideration when deciding which snow blower to buy. Whilst a new snowblower will come with a guarantee, if buying a used or second hand one, then availability and cost of parts is something that needs to be considered.

Parts and accessories can improve the experience of using an MTD snowblower, and there are many things that can be easily improvised at a reasonable cost. Some of the more common accessories on listed below.

Heavy duty snowblower cover

Snow blower tire chains

Heated hand grip Kit

LED light bar kit

Shear pin kit

Universal Snow Cab

Drift cutter kit

Slide shoes

Chute clean out tool and mounting bracket

Siphon pump

MTD Snowblower Manual and Parts Diagram

An MTD snowblower manual is a document that is a really good resource, and can be used extensively both as a point of reference and as a learning tool for using an MTD snowblower effectively and safely.

New snowblowers will come with a manual, and can also be downloaded from the MTD website. Older models, or usedor second hand models may also be available via the website depending upon their age, or there are other websites which will carry them such as manuals online.

They may also be available on sites such as eBay or Amazon. If someone is having real difficulty locating a manual, it is a good idea to post a message on one of the many snowblower forums, someone is more than likely to be able to help.

An MTD snowblowers manual is likely to have a number of sections. These will cover safe operating practices, how to assemble your snowblower if necessary, how to operate the snowblower and make adjustments. They should also be sections on maintenance, troubleshooting, accessories and kits and a parts list.

There should also be advice on how to store the snowblower when it is not being used which is a particularly important safety issue, and can be a real fire hazard if not done properly.

MTD Yard Machine Snowblower

An MTD Yard machine snowblower is called this simply so that people realise it is primarily intended for domestic use in homes and small landholdings. These machines can come either as single stage Snow throwers or two-stage snow throwers. The intent is to focus on snowblowers which are affordable for home and yard use.

Yard Machines 31AS2S1E700 Single-Stage Snow Thrower

Yard Machines 31A-2M1E700 Single-Stage Snow Thrower

Yard Machines 31A-2M1E752 Single-Stage Snow Thrower

Yard Machines 31AM63FF752 Two-Stage Snow Thrower

Yard Machines 31A-63BD700 Two-Stage Snow Thrower

Yard Machines 31AS63EE700 Two-Stage Snow Thrower

Yard Machines 26″ 31AS63EF729 Two-Stage Snow Thrower

Yard Machines 31A-32AD752 Two-Stage Compact Snow Thrower

Yard Machines 31AS63EF700 Two-Stage Snow Thrower

Yard Machines 31AS63EE752 Two-Stage Snow Thrower

MTD Snowblower Carburetor / Repairs

An effective  carburettor is at the heart of a really efficient snowblower.

Many people consider it a good idea to replace a carburettor fairly regularly, even if there is nothing noticeably wrong with the old one.

They are relatively cheap, there are a number of brands to choose from, and a new one can make a significant difference to the overall feel and power of the chosen MTD  snowblower.

 

Share