Toro 421 Snowblower, Parts and Manual

Toro 421 Snowblower

The Toro 421 is a two stage small frame 21 inch swath snowblower, sometimes referred to as a snowthrower.

The track record of this snowblower puts it at the front of other similar machines. It’s two stage mechanism fordispersing snow is highly effective.

The snowblower itself is lightweight and easy to move. It has a powerful engine, which delivers both efficient and consistent power.

If built to be easy to start in extremely cold weather, and to be easy to manoeuvre even in the most difficult and awkward conditions.

Its system of chute dispersal gives the operator to full throttle control, and an ability to direct the snow away from where is being cleared in a safe and efficient manner.

Having a copy of the snowblower manual is really important for a number of reasons as well.

Toro 421 Snowblower Parts

Below are listed the main categories of the Toro 421 parts, followed by a more detailed breakdown of which parts are normally available, and for which specific part of the snowblower they are needed for.

Toro 421 Snowblower maintenance sets

Toro 421 Snowblower belts

Toro 421 Snowblower shave plates

Toro 421 Snowblower shear pins

Toro 421 Snowblower slide shoes

Toro 421 Snowblower cables

Toro 421 Snowblower friction wheels and discs

Toro 421 Snowblower augers

Toro 421 Snowblower engine parts

Toro 421 Snowblower hardware

Toro 421 Snowblower pulleys

Toro 421 Snowblower tires and wheels

Toro 421 Snowblower discharge chutes

Toro 421 Snowblower auger gearboxes

Toro 421 Snowblower Parts – Detailed Breakdown

Toro 421 Auger Parts –

  • Auger bearings
  • Auger paddle
  • Impeller
  • Impell fan
  • Hub assembly
  • Plate cowl retainer


  • Differential axle
  • Hex shaft
  • Axle shaft
  • Short axle with bushings
  • Long differential axle
  • Axle weight – lbs 10/30

Batteries and Accessories

  • Battery charger
  • Battery cover
  • Dual port charger

Toro 421 Bearings and Washings

  • Bearings
  • Ball bearing
  • Fang baring
  • Radial bearing
  • Struggling bearing
  • Flange
  • Polyline
  • Sealed
  • Sleeve
  • Slinger
  • Spacer
  • Spindle
  • Steeled housing
  • Height
  • ID
  • Material
  • OD
  • Size
  • Type
  • weight
  • Width

Belts –

  • Belt keeper
  • Belts by size

Toro 421 Brakes

  • Brake assembly
  • Brake components
  • Brake linkage
  • Brake pads and shoes
  • Auger impeller brake pad
  • Brake arm assembly
  • Brake arm with pad
  • Brake lining



  • Interlock camp
  • Camshaft
  • Differential can
  • Camshaft assembly

Toro 421 Carburettors

  • Carburettor bowls,
  • Carburettor gaskets,
  • Carburettor kits,
  • Carburettor nozzles
  • Choke lever is
  • Diaphragm kit
  • Foats, pins and kits
  • Gasket set
  • Main jet
  • Needles valves and kit
  • Climate bulbs
  • Springs

Chutes and deck size


Clevis pins


Toro 421 Clutches

  • Dog sliding clutch
  • Clutch chain
  • Fork Clutch
  • Clutch paddle
  • Clutch gear
  • Clutch paddle sleeve
  • Clutch arm with brake pad
  • Jaw clutch
  • Right hand clutch lever grip

Connecting rods

Cotter pin



Cylinder head


  • Rotating danger decal
  • Differential lock decal


Toro 421 Discharge chute

  • Chute gear
  • Chute assembly
  • Outer retaining ring
  • Worm mounting bracket
  • Inner retainer ring
  • Discharge chute base
  • Chute actuation dear
  • Worm gear chute
  • Chute flange keeper
  • Quarter discharge bracket
  • Chute crank knob
  • Deflector
  • Lower chute
  • Chute retainer

Drift cutter

Drive chain

Toro 421 Drive components

  • Gear
  • Pinion shaft frame repair kit
  • Differential remote
  • Automatic differential
  • Pinion shaft
  • Hex shaft
  • Pin
  • Hub assembly lockout
  • Pinion sprocket
  • Ratchet dear
  • Shift carrier
  • Pinion shaft assembly
  • Disk hub
  • Slider ring assembly

Drive sprockets

Driveway marker

Just plug

Electric starter kits


  • Displacement
  • Grade
  • Power
  • Shaft size

Fan blade


  • Dual cable fitting
  • Grease fitting
  • Zerk fitting
  • Hydraulic drive fitting
  • Straight loop fitting
  • Cable z fitting
  • Fitting



Cover bottom


  • Bottom frame cover
  • Frame traction
  • Tractor frame
  • Frame assembly

Friction disc

Toro 421 Fuel filters, lines and parts

  • Elbow fittings
  • Fuel filters
  • Fuel line
  • Fuel line fitting
  • Fuel line shut-off
  • Fuel parts
  • Hose clamp
  • In-line fuel shut-off
  • Climate bulbs
  • Shop packs

Fuel tanks

  • Fuel tank
  • Fuel tank bushing
  • Fuel tank on/off valve
  • Fuel tank strainer
  • Gas tank
  • Fuel tank nipple

Gas and oil


  • Air cleaner gasket
  • Base gasket
  • Carburettor gasket
  • Cylinder head gasket
  • Gasket set
  • Head gasket
  • Insulator gasket
  • Intake gasket
  • Muffler gasket


  • Fuel gauge assembly

Gear case

  • Housing reducer assembly
  • Cast iron gear case
  • Shaft and worm gear kit
  • Impeller shaft
  • Role him
  • Gear case assembly
  • Auger Gearbox Assembly




Headlight bulbs

Hinge pins

Hitch pins

Hose Clamps

  • Tube Clamp
  • Hose Clamp
  • Hose Wire Clamp

Hubcaps and wheel covers


Toro 421 Ignition parts

  • breaker ignition
  • breaker points
  • condenser
  • flywheel keys
  • ignition coils
  • ignition kits
  • ignition set
  • modules
  • plunger breakers
  • voltage regulators

Ignition switches and keys

Light Kit


lubricants chemicals and oils

Lubrication systems

Maintenance kits


  • Shaft support
  • Bracket
  • Idler arm
  • Caster Leg Weldment

Mufflers and accessories

Nuts, bolts and screws

Oil Drain

  • Petcock Assembly

Oil extractor

Oil plug

Oil seals

Pinion gear

Pistons and piston rings –

  • Piston kits
  • Piston rings
  • Pistons
  • Pivot pins
  • Ring sets

Power brushes

Power cords


  • Drive pulleys
  • Engine pulleys
  • Flat idler
  • Idler pulleys
  • Pulley flat idler
  • Pulley hub
  • Blower Sheave

Push rod

Retainer ring



Rocker Arms

Role pin

Roller chain

Rubber tracks

Safety, interlock, PTO switches

  • Interlock switches
  • PTO switches
  • Toggle Switches

Scraper blades


Sheer pin

Skid shoes

Snap rings


Spark plugs and accessories – hex size, thread and type


Starter parts

  • Starter brush kits
  • Starter clubbers
  • Starter dried parts
  • Starter handles
  • Starter pawls
  • Starter pulley
  • Starter recoil assemblies
  • Starter rope
  • Starter springs



  • Steering assembly
  • Steering ball joint
  • Steering gear
  • Steering rod
  • Steering spindles

Toro 421 Throttle and control cables

  • Auger cable
  • Brake and clutch levers
  • Chute deflector cable
  • Chute lock cable
  • Control assembly
  • Control cables
  • Controlled choke
  • Differential cable
  • Push pull controls
  • Remote wheel lock cable
  • Shift rods
  • Throttle access
  • Throttle cables
  • Throttle conduit and clips
  • Throttle controls
  • Traction cable

Tiedowns and straps

Tire chains

  • Snow Hogg two link tire chains
  • Twist link two link tire chains
  • Twist link four link tire chains



  • Gear assembly
  • Chute rotation gearbox
  • Tooth gear,


Valve stems


  • Exhaust valves
  • Intake valves
  • Valve caps
  • Valve guide

Weight kit

Wheel Accessories

Wheel hubs

Wheel rims

  • Compression wheel
  • Rim/hub assembly
  • Rim


Wiring harness

Worm gears

  • Worm gear
  • Worm shaft
  • Worm and gear service assembly
  • Worm shaft assembly
  • Worm shaft

Toro 421 Snowblower Parts Diagram

Parts diagrams for the Toro 421 can be found in the manual, sometimes on the main Toro website and other websites as well. They are sometimes referred to as assembly drawings.

The main assembly drawings, or parts diagrams listed for the Toro 421 are :

Auger assembly


Drift breaker

Engine assembly new line grader blade assembly

Handle assembly


Rewind Starter

Starter Motor kit

Traction assembly

Toro 421 Snowblower Manual

The manual gives important information about how to use the Toro 421 snowblower.

It has a separate number of sections which focus on safety, set up, preparation, controls, usage, maintenance and warranty.

Below is a breakdown of the standard section of a Toro manual, bear in mind that these could differ depending upon the age and type of snowblower being referred to.

Toro 421 Manual Safety Decals –

  • General advice about safety when using the snowblower

Toro 421 Manual Setup Instructions

  • Installing handle
  • Installed traction roared
  • Install Auger drive
  • Install speed selector
  • Connect ignition wires
  • Install chute control

Toro 421 Manual Preparation Before Starting

  • Filling with oil
  • Filling with gasoline
  • Checking snowblower operation

Toro 421 Manual Controls

Toro 421 Manual Starting / Stopping Engine

Toro 421 Manual Operating Instructions

Toro 421 Manual Maintenance

  • Draining gasoline
  • Lubricating snowblower
  • Changing outgoing gear box oil
  • Adjusting skids and scraper blade
  • Replacing Auge/impeller drive belt
  • Replacing traction drive belt
  • Replacing spark plug
  • Adjusting carburettor

Toro 421 Manual Warranty

  • Residential Warranty
  • Commercial Warranty
  • Separate Engine Warranty

Toro 421 Snowblower Specs

  • Swath – clearing width 21 Inch
  • Engine Type –  4 Cycle
  • Fuel Capacity – n/a
  • Discharge -Two Stage
  • Engine Size – 4 hp
  • Scraper – n/a
  • Tires – n/a
  • Chute Control – n/a
  • Ignition – n/a
  • Throw Distance – n/a
  • Weight n/a

Toro 421 Snowblower Carburetor

Toro 421 Reviews

Reviews of the Toro 421 snowblower can be found online, in discussion forums, on Facebook groups and on You Tube.

Given the age of the snowblower, reviews will also focus on a lot of second hand snowblowers, what they are worth, how easy it is to obtain parts and whether or not it is worth upgrading to a new model.

Toro 421 Snowblower Price

There are still a significant number of these snowblowers available to buy, either online or through local sales sites such as craigslist,

There are also a wide range of parts available, often on sites such as eBay.

The price for a second-hand or used 421 snowblower will vary considerably, depending on the age and condition of the machine itself.

Toro 421 Snowblower Accessories

Toro made a number of accessories for all their snowblowers, which are listed below.

It is important to check that any accessory you’re going to buy fits a particular model, such as the Toro 421, that you have either bought or are intending to purchase.

Electric starter kit

Drift breaker kit

Light kit

Tire chain kit

Snow Cab

Tire chains

Grader Blade

Replacement Paddle Kit

Two Stage Cover

Replacement Skids